RSS MK ™ coating. less adhesion of micro-organisms
- Brand: RSS MK™ coating
- Article code: VDV12860
- Availability: In stock
- Delivery time: 1-4 working days
1 Bottle of RSS MK ™ coating (15ml)
1 Bottle of Isopropanol (50 ml)
1 NT80 cloth (white)
1 Microfiber cloth (blue)
1 Owner's Manual
This coating is composed in such a way that surfaces of lacquered and painted materials, plastic and stainless steel (precious metals) reduce contact with grease, dirt and water. Also, fewer microorganisms can adhere to the treated parts.
Billiards, pool cues, billiard balls and all touchable parts such as door posts and handles.
- Lacquered and painted surfaces
- Stainless steel and precious metals
Lifespan +/- 2 years, repeat the steps below.
Store after opening +/- 2 years.
RSS MK ™ coating can be cleaned with almost all household cleaning agents (disinfection). Note not below 2PH and above 12PH value.
Mixing with other substances or contents is strictly prohibited.
Instructions for use RSS MK ™ coating:
The top edge must be thoroughly cleaned so that the surface is free from grease and dirt. No silicone-containing agents may be used for this. Use the supplied blue microfibre cloth together with the Isopropanol for this. (If the top belt is so greasy and dirty, use a degreasing agent first). Make sure that you only clean the edge and never get on the billiard cloth. When no more grease and dirt comes off the belt, you can go to step 2 after drying.
- Apply RSS MK ™ coating
You can use the supplied NT80 white cloth to apply the coating. The coating should be applied very thinly. By pressing the cloth onto the opened bottle and briefly inverting the bottle, enough coating will be applied to the cloth to start coating. Turn the cloth over the belt in circular movements. Behind the cloth a short haze of coating develops on the surface. As long as this haze is visible, there is sufficient coating on the cloth. If this haze decreases, a new coating can be applied to the cloth. Once all components are treated, we recommend to apply a 2nd layer. This is to ensure that everything has been treated.
- To dry
After treatment of the total surface, the coating needs time to form the desired molecular bond with the substrate.
After a few minutes of drying time has passed, any residue from the coating can be wiped off. You can do this with the used white cloth.
After 24 hours, the surface can only be loaded or exposed to water.