Artemis carom top end

An Artemis carom cue tip is a practical choice when you want to replace the tip of your billiard cue or are looking for a spare tip. At Van den Broek Biljarts, we are happy to help you choose a suitable version for your Artemis carom cue.

A new tip for your Artemis cue

Is your current neck due for replacement? With a new neck, you can continue using your trusted bottom piece. An extra neck is also handy as a spare during training and matches.

When making your choice, pay attention to the length, the tip diameter, and the connection to your cue. Together, these characteristics determine whether the tip suits your cue and playing preference.

Choose your cue tip diameter and finish

The desired tip diameter is a personal choice. The type of tip also influences the playing feel. Therefore, check the specifications and options of the relevant Artemis cue shaft.

Would you like to switch to a different diameter or cue tip? We would be happy to advise you on the possibilities.

Buy Artemis carom billiard top end at Van den Broek Biljarts

At Van den Broek Biljarts, you benefit from over 60 years of experience with billiards, cues, and cue repairs. We help you choose a suitable Artemis cue tip and the right tip.

Unsure if a top end fits your cue? Contact us or visit our store in Almere. Bring your cue with you so we can assess the fit.

Important information regarding the purchase of an extra top end / shaft

When purchasing an extra shaft , it is important to pay close attention to the wooden screw joint . Even if you buy a shaft from the same brand as your cue, that does not automatically mean it will fit perfectly . Wooden joints are made individually and can always vary slightly in size or fit.

Be careful when tightening

Is the top end screwing too tightly into the bottom end? Then never overtighten. Forcing it can damage or even break the threads , resulting in permanent damage.

Possible solutions

There are a few safe ways to improve an overly tight wooden fit yourself:

• Sprinkle talcum powder lightly on the screw thread and try again.

• Apply graphite (with a regular pencil) to the screw thread

• Very fine sandpaper (use only very carefully and exclusively on the wooden part)

These methods can sometimes make the fit just smooth enough without causing damage.

Never use wet or greasy lubricants

Never use soap, wax, oil, grease, or other wet lubricants . You might be able to assemble the cue with these, but often won't be able to take it apart again — with a high risk of permanent damage.

Is it still not working?

If talcum powder, graphite, or fine sandpaper still doesn't work , send the entire cue to us. We can make the fit professional and secure.

Call us: 0365374054 Email us: [email protected]

We are happy to help you so that your cue aligns perfectly again.

We stand for service

We are happy to assist you if you have any doubts about a particular product or have any questions. Orders over €125 are shipped free of charge within the Netherlands (with the exception of tables).

Of course, it can always happen that you are not satisfied with the product. No problem, you may simply return your product provided it is not damaged. We accept returns that are sent back within 14 days of delivery.

Questions about Artemis top ends?

Do you have any questions about Artemis cue tips? Then you can of course come to us for comprehensive advice. Van den Broek Biljarts is always at your service. So feel free to call 0365374054 or email [email protected]. Naturally, you can also visit us at our well-stocked store at Bolderweg 37 A/B - 1332 AZ Almere-Buiten. We are happy to answer all your questions regarding cue tip products.