Buffalo carom top end

Would you like to buy a Buffalo carom cue tip ? At Van den Broek Biljarts, we are happy to help you choose a suitable tip for your Buffalo billiard cue. Suitable as a replacement for your current tip or as an extra tip for training and matches.

Replace the tip of your Buffalo cue

Is your cue tip worn or damaged? With a matching new tip, you can continue using the familiar butt section of your cue. A spare tip is also practical when your ferrule needs replacing.

Check in advance which tip is suitable for your Buffalo carom cue. The connection may vary depending on the model. Therefore, the brand name alone is not sufficient to determine the correct fit.

Choose the right version and cue tip

When choosing a Buffalo cue tip, pay attention to the length, tip diameter, and connection. The type of tip and the hardness also affect your playing feel.

Check for the relevant product:

• The connection to the base.

• The material and the length of the tip.

• The diameter of the French kiss.

• The fitted cue tip and any optional features.

Would you like to try the same finish as your current tip, or a different cue? We would be happy to advise you on a choice that suits your playing preference.

Buy Buffalo carom billiard top end at Van den Broek Biljarts

Van den Broek Biljarts has over 60 years of experience with billiards, cues, and maintenance. In addition to advice on Buffalo carom cue tips, you can come to us for cue repair and replacing tips.

Unsure about the connection? Contact us or visit our store in Almere. Bring your cue with you so we can assess which tip fits.

Important information regarding the purchase of an extra top end / shaft

When purchasing an extra shaft , it is important to pay close attention to the wooden screw joint . Even if you buy a shaft from the same brand as your cue, that does not automatically mean it will fit perfectly . Wooden joints are made individually and can always vary slightly in size or fit.

Be careful when tightening

Is the top end screwing too tightly into the bottom end? Then never overtighten. Forcing it can damage or even break the threads , resulting in permanent damage.

Possible solutions

There are a few safe ways to improve an overly tight wooden fit yourself:

• Sprinkle talcum powder lightly on the screw thread and try again.

• Apply graphite (with a regular pencil) to the screw thread

• Very fine sandpaper (use only very carefully and exclusively on the wooden part)

These methods can sometimes make the fit just smooth enough without causing damage.

Never use wet or greasy lubricants

Never use soap, wax, oil, grease, or other wet lubricants . You might be able to assemble the cue with these, but often won't be able to take it apart again — with a high risk of permanent damage.

Is it still not working?

If talcum powder, graphite, or fine sandpaper still doesn't work , send the entire cue to us. We can make the fit professional and secure.

Call us: 0365374054 Email us: [email protected]

We are happy to help you so that your cue aligns perfectly again.

We stand for service

We are happy to assist you if you have any doubts about a particular product or have any questions. Orders over €125 are shipped free of charge within the Netherlands (with the exception of tables).

Of course, it can always happen that you are not satisfied with the product. No problem, you may simply return your product provided it is not damaged. We accept returns that are sent back within 14 days of delivery.

Questions about Buffalo top ends?

Do you have any questions about Buffalo cue tips? Then you can of course come to us for comprehensive advice. Van den Broek Biljarts is always at your service. So feel free to call 0365374054 or email [email protected]. Naturally, you can also visit us at our well-stocked store at Bolderweg 37 A/B - 1332 AZ Almere-Buiten. We are happy to answer all your questions about cue tip products.